If you have just installed your new Beko washer dryer, there are a few things you need to do to ensure the machine works properly. Adjust the feet to ensure that the appliance is level and standing firmly on all its feet. Remove the transportation bolts before using the machine. These bolts keep the drum stable during transportation and stops possible damage to the appliance. If possible, keep the bolts in case the appliance needs to be moved again. There will be a strip of tape coming under the front of the appliance, pull this to free the transportation polystyrene which can then be disposed of. Please remember you will need the help of another person as the appliance is heavy. To remove the polystyrene block, the appliance needs to be tilted to 45 degrees. Your manual will have pictures showing how this should be done, if you cannot find your manual, please click here to download a copy.
Did we answer your question?
We are so sorry we were unable to answer your question. You might be able to find the answer you are looking for in the ‘Related Questions’ below. We are always looking to improve our service so would really appreciate your feedback on why we were unable to help you today. After you have completed your feedback please head over to our Contact Us page for further assistance as we are unable to respond directly to your feedback.
†Source Euromonitor International Limited; Consumer Appliances 2020 ed, as per major appliances definition, retail volume sales in units, 2019 data