How to use your SteamXtra® Steam Generator Iron SGA8328B for the first time

When your new Beko SteamXtra® Steam Generator Iron SGA8328B arrives, carefully remove all parts from the packaging and use the user manual to check that you have all the parts and attachments.
Remove the water tank and fill with water (maximum capacity 1.8L). Once full, place the water tank back in the steam station.
Plug the appliance into a nearby power source. The LED control panel will flash when power is connected.
Switch the appliance on using the on/off button and turn the transport lock at the tip of the iron to release it.
Using the control button, set the iron to turbo mode before first use.
To remove the manufacturing residue, point the iron in a safe direction then hold the steam trigger for 10 to 15 minutes. Once the manufacturing residue is removed, your Beko SteamXtra® Steam Generator SGA8328B is ready for use.

Need Product Support?

If you have any questions about your Beko appliance, we are here to help. Finding answers and information is easy with Beko’s helpful online resources, simply browse our product support topics below and select the one that is relevant to you.

Manuals

Beko manuals contain helpful information and advice about your appliance.

View Manuals

Product Registration

We can quickly contact you for an important product update or service repairs.

FAQs

Browse the most asked questions about our product range.

Search FAQs

How-to Videos

Helpful how-to videos on our appliances.

View How-Tos